Benchtop Pneumatic Rotary Engraver Cylindrical Part Marking Machine HS-DP01-R

The Benchtop Pneumatic Rotary Engraver makes marking easier than ever before.  It is a computer-controlled marking needle that moves in the X, Y two-dimensional plane according to a certain guide rail. Under the influence of compressed air, the marking needle creates a high-frequency impact motion that engraves a mark with a depth on the surface of your object.

The HS-DP01-R Benchtop Pneumatic Rotary Marking Engraver can mark on flat and circular surfaces, it has a cylindrical part dot peen, it has a good engraving depth, has direct marking output through the computer, and the marking result is clear. This machine can be used to dot peen marks on different metal and plastic materials.

Technical Details

Model Number - HS-DP01-R 

Standard Marking Area - 120mm x 80mm (4.7in x 3.14in)

Marking Speed - 30mm-40mm/s 

Impact Frequency - 300 times/s 

Marking Depth - 0.05mm-0.5mm per material) 

Power Supply - AC 100V-240V 50HZ/60HZ 

Air Power Request - 0.2Mpa 0.6Mpa 

Humidity - 0-90% (Non-condensing) 

Temperature - From 0 to 40 Centigrade Degree 

Marked Content - All English Characters, All Numbers, Variety of Graphics outline, Logos, Dot Matrix codes, Circle Letters, Serial Numbers, etc. 

Other Request - Need your side prepare air compressor and computer

What Can the Machine Be Used for? 

The Benchtop Pneumatic Rotary Marking Engraver HS-DP01-R is mainly used for metal parts, car and motorcycle parts, tubes, pipes, valves, metal tag engraving, and other industries small and medium parts engraving and marking. 

With the help of our program ThorX6 installed on your computer, a user can engrave different kinds of markings, such as English alphabets, numerical digits, numerals, symbols, or logos, depending on the desired content. The solid build of the machine makes it less vulnerable to be repaired on a regular basis. Thus it does not require much maintenance as well.

Features of Benchtop Pneumatic Rotary Marking Engraver HS-DP01-R

• High quality marking on metal or plastic materials

• Pneumatic Rotary Marking Engraver works on air power (So your side prepare air compressor)

• It is programmed to work through a PC. It is shipped with the relevant software, USB, and cable.

• The table's screw holes make it simple to attach the "to-be-marked" items.

• For marking in difficult-to-reach places, the vertical position of the marking head can be modified with the manual adjustment wheel. 

Why choose HeatSign’s Benchtop Pneumatic Rotary Engraver?

High quality: High quality marking on metal or plastic materials, we do testing of every machine 72 hours after it finishes assembling, making sure it will work well. 

Longevity: Our marking machine comes with 4 marking pins, every marking pin at least can last 6 months of work. 

Easy to use: Fixtures are simple to attach to the base, allowing for quick and consistent part positioning. 

User-friendly design: HeatSign provides a Pneumatic Rotary Marking Engraver that is both easy to install and operate and is developed in an integrated and compact manner. It does not necessitate extensive technical knowledge.

Low Prices and Fast Delivery: We have endeavored to make a real difference for our customers with superior marking solutions with quality engraving and marking machines, low prices, fast and reliable delivery, and a trusted and convenient experience.

Technology: Over the last ten years, HeatSign has focused on Direct Marking Technologies and Marking Machines. Our goal is to be the most customer-focused organization in the world

High Efficiency: The exceptional quality and high efficiency of HeatSign's products are well-known. They don't obstruct your work in any way.

Supports & Accessories

• 19 Pin Connect Cable 

• Air Power Valve

• Marking Pin

• Power Adapter 

• Rotary Chuck 

• Machine Body

If any question, feel free to contact us (info@heatsign.com)