HeatSign desktop electric metal engraving machine uses an integrated design for extremely stable and user-friendly experience to provide a superior quality engraving depth, high frequency speed, direct parts marking, marking result clear, and support some uneven surface marking.adopt integrated design, extremely stable and easy to use, a good engraving depth, high speed direct parts marking, marking result clear.

The dot peen marking machine HS-DE01 is majorly utilized for metal parts, cars and motorcycle parts, instrumentation, machinery, metal tag engraving, and other industries small and medium parts engraving and marking.

Description of the machine

The top of the machine comprises a lifting handle.

On the screen of the marking machine, on the left you will notice a power switch, LED light switch, and a 7-inch industrial touch screen in the middle.

On the right of the screen, you will notice a punch power adjustment button, test switch, emergency stop button and a marking button.

On the bottom of the screen, you will observe a marking pin.

At last, a working table is attached to the machine where you place the metal that needs to be engraved.

Uses of the machine

HeatSign dot engraving machine can be used to mark the following products and surfaces:

• Metal parts

• Machinery

• Industries small and medium parts

• Carbon steel

• Copper

• Mild steel

• Plastic marking

• Stainless steel

• Steel tube

What makes the dot peen marking machine HS-DE01 by HeatSign unique?

• Integrated design: Usually the contemporary marking machine had a complicated split type design which required a lot of cables and needed a connection to the computer and air compressor.

 The industrial integrated design of the desktop electric metal engraving machine by HeatSign is known for its latest technology that offers high speed marking to the metal surface. All you need to do is plug and click on the start button.

• Mainboard: The common marking machine comprises an unreasonable layout board with low quality shock resistance. The mainboard could not handle the high working temperature which made such marking machines prone to crash easily and cause the marking process to slow down.

The HeatSign desktop electric metal engraving machine offers an industry-class design with amazing electric performance that provides an extra EMC compatibility board which is extremely stable.

• Marking pins: Other marking machines have easily breakable and low wear resistance marking pins which are made of the most common cast aluminium materials. Such low-quality marking pins lead to uneven needle vibration and hence unclear marking. The marking hardness of such marking machines goes up to only HRC-57.

The dot peen marking machine HS-DE01 by HeatSign offers such marking pins adopt hard alloy metal, which is durable and long life.The marking hardness of the HeatSign dot peen marking machine can go up to HRC-67.

• Technology: Other marking machines have free pin punching technology that has unstable air pressure and inconsistent marking depth. Such marking machines can only mark on flat metal surfaces. They have a limited marking capability.

The dot peen marking machine by HeatSign offers the HEF needle marking technology that not only provides clear marking results but also gives the same marking depth to the metal surface.

• Marking Result: Users face problems with marking results as they are usually rough and the marking machine fails to provide continuous lines and the marking depth is very shallow.

The common problem caused by the marking machine includes failure to provide beautiful marks on some metal surfaces.

However, the marking result provided by the dot peen engraving machine by HeatSign has regular and clear result. The consistent marking depth offered by the HeatSign dot peen marking machine is remarkable.

The deep marking provided by the HeatSign dot peen marking machine is compatible with most metals.

Technical description of the HS-DE01 Dot Peen Marking Machine: 

 

Model Number	HS-DE01
Standard Marking Area	140mm * 90mm
Marking speed	40mm ~ 50mm/s
Impact Frequency	300 times/s
Marking Depth	0.05mm ~ 0.8mm(per material)
Power Supply	AC 100V ~ 240V 50HZ60HZ
Energy Consumption	125W
Controller Type	Integrated 7 inch touch screen and powerful software
Marking Type	Automation
Marking machine type	Desktop, Tabletop
Marked Content	All English Characters, All Numbers, Variety of Graphics outlines, Logos, Dot Matrix 2D codes, Circle Letters, Serial Numbers, etc.
Marking materials	Metal or nonmetals with hardness under HRC60
Usage	Metal machine for etching, marking, engraving - Stylus printer, dot peen header
Dot peen header	Harden HRC60 (Hardness)
Marking Materials	Metal or nonmetals with hardness under HRC 60
HEF Technology	Support some uneven surface marking( height differ within 1mm)
Other device request	No need connect other outside device like computer or air compressor, just plug and play

Benefits of using a dot peen engraving machine by HeatSign:

• Stable: The stability offered by the HeatSign dot peen engraving machine has been one of the best things that could happen for your metal products.

• User-friendly: HeatSign makes sure that you don’t need technical skills to operate such marking machines. You can easily understand the design and structure and easily mark the metal surface according to your requirements.

• Long life: HeatSign uses superior quality parts in its dot peen engraving machine allowing it to live longer and function better for your benefit.

• High Efficiency: The solid structure offered by the HeatSign dot peen engraving machine provides high efficiency to the functioning and hence better output marking results.

• Good marking depth: The marking depth provided by dot peen engraving machine by HeatSign give you desired and result.

If you have any inquiry, do not hesitate to contact us by email info@heatsign.com