Electric Portable Vin Number Marking Machine, Handheld Metal Engraver

HeatSign  HS-PE01 Electric Portable Handheld Dot Peen Pin Metal Engraving Machine is known for its user-friendly nature. It is also used as a Vin Number marking machine for vin chassis code deep marking.

The portable dot peen engraver HS-PE series is majorly used to mark for cars and motorcycle parts vin number marking, mechanical metal parts engraving, and other industries medium and big size parts engraving and marking. It is very helpful for your product identification traceability.

HeatSign Portable metal dot peen marking machine features includes integrated design, high stability, user-friendly nature, solid engraving depth, supports some uneven surface marking, direct marking output through the electric power, and provides marking result which is permanent and clear.

Benefits of the electric portable handheld dot peen pin metal engraving machine by HeatSign

• Integrated design

• Extremely stable

• Easy to use

• Powerful software

• Deep marking

• Top configuration

Design of the marking machine

·        HEF needle marking technology: HeatSign offers such technology which can engrave on uneven surfaces with a guarantee of clear marking results and the same marking depth.

Functioning of the dot peen marking machine by HeatSign

·        Connect the power supply: The first step includes connecting the power supply to start the marking machine.

·        Create content by software: After you have properly connected the supply, create the required content with the help of the software.

·        Position the marking place: Once you are done creating the content through the software, position the marking area on the metal surface.

·        Start marking: After assuring the completion of above three steps, start the marking process to get the desired result.

Structure explanation of the electric dot peen engraving machine by HeatSign

On the above surface of the dot peen engraving machine, you will notice a 7-inch industrial touch screen in the middle. On the right side of the screen, you will notice two buttons known as a light switch and a power switch next to each other.

On the left of the screen, you will notice three buttons. The blue button is a test switch, the yellow button is known as the emergency stop button, while the green button is called the marking button.

The black part attached to the left side of the machine consists of a button known as the power interface.

Below the black part there is another button known as the punch power adjustment button.

On the bottom you will see the marking pin hanging to the down side.

On the left and right side of the marking pin there are two box shaped parts which are known as the electromagnetic basements.

Technical description of the dot peen engraving machine by HeatSign:

If any question, you can email us info@heatsign.com